Buying a bushfire-prone property in Sydney? What to check (free guide)

Updated: Oct 16
By William Yen-Wen Wang, Nominated Architect (NSW 9897), WWAA, North Sydney
16 October 2026

Found a home you like, then noticed it sits on bush fire prone land?
The outlook may be part of the appeal: privacy, mature trees and a living room looking into green. You may already be imagining a larger deck, an extension or a new home.
Before you price those possibilities into your offer on a bushfire-prone property in Sydney, find out what bushfire requirements could mean for the property and your plans.
Short answer: Bush fire prone land mapping identifies land that can support a bush fire or be subject to bush fire attack. It does not establish the property’s Bush Fire Attack Level (BAL), or confirm that your proposed work can be approved. Check current mapping, then obtain advice for the proposal you have in mind. NSW RFS guidance
Key facts
Bush fire prone land (BFPL) mapping and a BAL assessment serve different purposes.
Bushfire requirements can affect siting, openings, materials, landscaping, access and water supply.
A BAL rating alone does not establish eligibility for a complying development certificate (CDC).
The 10/50 Vegetation Clearing Scheme has a separate eligibility map and conditions.
WWAA Knowledge | Bushfire is a free, illustrated 12-page guide for Sydney home buyers and owners. This page answers the main questions. The guide adds diagrams, BAL comparisons and five questions to ask before design.
Your free copy is ready (PDF, 2.7 MB, no sign-up):
If the button doesn’t open the file, use this link: WWAA Knowledge – Bushfire (PDF).
Download not working? Your in-app browser may block downloads. Tap ••• at the top right, choose ‘Open in browser’, then tap Download again.
What does bush fire prone land mean for a buyer?
It does not make a property a bad buy on its own. It means bushfire needs to be part of your property checks, particularly if you plan to extend or rebuild. Consider exposure, the existing building, your proposed work, insurance and maintenance together.
Read the current Section 10.7 planning certificate and check bush fire prone land mapping. Then separate what is known about the existing house from what needs assessing for your proposed work.
Being outside the mapped area does not mean there is no risk. Land outside it can still be exposed to bushfire attack, and mapping can change. NSW RFS guidance
Can I still renovate or rebuild on bush fire prone land?
The map alone cannot answer that. Your proposal needs assessment against the site’s constraints and applicable requirements.
The existing house does not establish approval for a new design, and an agent’s description of “rebuilding potential” is not an assessment. Check the proposed siting and construction requirements.
The useful question is whether the particular home you want is achievable: its footprint, outlook, outdoor spaces and budget. If the appeal depends on “extending out the back” or “building closer to the view”, seek an early review before bidding at auction or exchanging contracts, while you can still compare properties. NSW RFS development guidance
What is a BAL, and why does it matter?
BAL stands for Bush Fire Attack Level. It describes assessed bushfire exposure and informs construction requirements.
The assessment considers vegetation, distance, the slope beneath the vegetation and the design fire weather for the locality. It is different from the daily fire danger rating.
The BAL helps inform windows, doors, roofs and other building elements. It needs to be considered alongside siting, access and wider protection measures. It is not a guarantee that a home will survive a bushfire. PBP 2019
Will I have to give up the windows or deck I want?
Large openings, a deck facing the bush and particular materials may need different specifications or protection measures.
If the outlook is why you love the property, ask how the living spaces could face it, how the openings would be protected and what those choices could mean for cost and everyday use.
Bushfire requirements should inform siting, openings and materials from the outset. Confirming these decisions early can reduce the risk of redesign.
Can I clear nearby trees under the 10/50 rule?
Possibly, if the property and building qualify and the clearing meets the current Code.
The 10/50 Vegetation Clearing Scheme applies around eligible existing buildings, with conditions covering lawful occupancy, ownership, consent and exclusions. A planned new home does not, by itself, create clearing rights.
Check the NSW RFS online tool on the day of clearing, and retain the result.
Do not base an extension, a better view or a lower BAL on tree removal that has not been confirmed as permissible. NSW RFS 10/50 guidance
Do I need a DA, or can I use a CDC on bush fire prone land?
It depends on the proposed work and all applicable requirements. A lower BAL does not, on its own, mean you can use a CDC.
For a new dwelling on bush fire prone land, BAL-29 or below is only one condition for complying development. The proposal must also satisfy the relevant Code’s other requirements. BAL-40 or BAL-FZ changes the approval position and needs specific advice.
Different types of work can have different provisions. Confirm the scope with council or your certifier before relying on a CDC pathway. NSW Planning guidance
What could this mean for cost and insurance?
Ask where additional work would sit in your proposal: assessment, specified construction systems, installation, access, water supply or landscaping.
A quote for bushfire-rated windows will not tell you the cost of the whole project. The guide shows why the building envelope needs to be considered together.
Obtain insurance quotes before committing. Check cover, exclusions, excesses, waiting periods and whether the sum insured reflects rebuilding costs. A seller’s premium is not a quote for your household. ASIC Moneysmart
Who should I talk to first?
Start with council for planning information. A suitably qualified bush fire consultant can assess the site, and an architect can relate the findings to your plans. If you are considering complying development, involve the certifier early.
Six checks before you buy
Read the current Section 10.7 certificate and check bush fire prone land mapping.
Identify the renovation, extension or rebuild you are relying on.
Seek an early assessment of siting, exposure and likely construction requirements.
Confirm the approval pathway and applicable CDC conditions.
Verify clearing assumptions and obtain insurance quotes.
Allow for assessment, construction and ongoing maintenance.
What’s in the free guide

The 12-page presentation covers:
the four inputs that inform a BAL assessment
BAL ratings and their design implications
fire, embers and radiant heat
roofs, gaps and openings as one building envelope
the 10/50 scheme and its limits
approval pathways and opening protection
five questions to ask before design.
Sources
This article and the guide are general information only. Confirm current requirements with council and obtain suitably qualified advice for the particular property.
About the author
William Yen-Wen Wang is the Nominated Architect of WWAA, a residential architecture practice in North Sydney (NSW Architect Registration 9897). He holds an MPhil in Environmental Design in Architecture from the University of Cambridge and a BArch (Hons 1) from UNSW, and is a PMP and LEED Green Associate.
Have a property in mind?
Start with the guide and the property’s planning certificate. For a site-specific view before committing, email the listing and a brief description of your plans to mail@wwaa.au to discuss a pre-purchase feasibility study.
WWAA designs new homes, knock-down rebuilds and renovations across Sydney, including on heritage conservation area, flood-affected and bushfire-prone land.
Related guides: Buying a flood-affected property in Sydney · Feasibility study guide
Understanding Before Design.
Architecture for Life and Time.
WWAA | William Wang Architect & Associates
Level 25, 100 Mount Street, North Sydney NSW 2060
Get the next guide in your inbox
Free, practical guides on buying, building and renovating in NSW: flooding, bushfire, heritage, feasibility and more. We'll email you when a new one is out. No spam, and you can unsubscribe at any time.

This is incredibly helpful, thank you! Many buyers fall in love with the lush green outlook and privacy of bush-adjacent properties without realizing how BAL ratings, ember protection, and insurance costs can impact a future deck or extension. Having a clear six-step checklist and a downloadable 12-page guide makes early due diligence feel much more manageable.