Buying a flood-affected property in Sydney? What to check (free guide)

Updated: Oct 16
By William Yen-Wen Wang, Nominated Architect (NSW 9897), WWAA, North Sydney
12 October 2026

Found a home you like, then noticed flood information on its Section 10.7 planning certificate?
Before you buy a flood-affected property in Sydney, it’s worth finding out what that notation means for the block, and for any plans to renovate or rebuild later.
Short answer: A flood notation on a Section 10.7 planning certificate means council applies flood-related development controls to all or part of the land. It doesn’t mean you can’t buy or build. It means the house has to respond to a set flood level, so check council’s flood information, the likely floor height, insurance and the approval pathway before you commit.
Key facts
Since 2021, NSW planning certificates must state whether land is in the flood planning area, and whether it sits between the flood planning area and the probable maximum flood (PMF).
A 1% AEP (annual exceedance probability) flood has a 1% chance of happening in any year. Over a 30-year loan, that adds up to about a 26% chance of at least one.
The flood planning level (FPL) is commonly the 1% AEP flood level plus 0.5 m of freeboard, but each council sets its own basis.
A flood notation on its own doesn’t decide whether you need a development application (DA) or can use a complying development certificate (CDC).
WWAA Knowledge | Flooding is a free, illustrated 18-page guide for Sydney home buyers. This page answers the main questions. The guide adds the diagrams, comparison tables and a printable checklist.
Your free copy is ready (PDF, 1.7 MB, no sign-up):
If the button doesn’t open the file, use this link: WWAA Knowledge – Flooding (PDF).
Download not working? Your in-app browser may block downloads. Tap ••• at the top right, choose ‘Open in browser’, then tap Download again.
What does a flood notation on a 10.7 certificate mean?
It means council has flood information for the area and applies flood-related controls to the land. Read the whole certificate, including any 10.7(5) section, which often adds detail. Then find council’s adopted flood study and flood maps for the street, and ask whether property-specific flood information is available. Some councils sell a flood information certificate.
A map needs context. Check which flood event it shows, whether a figure is a water level or a depth above ground, and which version of the mapping council currently uses. Also ask whether overland flow from heavy local rain has been assessed.
Can I still build on a flood-affected property in Sydney?
Often, yes. It depends on which part of the floodplain the block is in. Council flood studies usually split land into floodway (where water flows fast), flood storage (where water sits during a flood) and flood fringe (the rest). Building in a floodway is tightly restricted and often not supported. Flood storage is controlled because filling it pushes water onto neighbours. Fringe land is usually the most workable, but floor levels, access and materials still apply.
What does 1% AEP mean?
A 1% AEP flood used to be called a ‘1 in 100 year flood’, which gave people the wrong idea. It has a 1% chance of being reached or exceeded in any year, and it can happen two years running. Over 80 years, the chance of at least one is about 55%, the figure the NSW Flood Risk Management Manual (2023) uses to explain it.
How high does the house need to sit?
Most councils require habitable floors to be at or above the flood planning level. The FPL is usually the 1% AEP flood level plus freeboard, a safety margin that is often 0.5 m. Levels are given in AHD (Australian Height Datum), so you need a site survey in AHD to see how far the existing ground sits below the FPL. That gap drives much of the design: raised or suspended floors, steps and ramps, and where the garage can go.
Floor height is only part of it. Think about how people get in and out when the street floods, where switchboards and hot water sit, and how quickly the house can be cleaned and used again.
Do I need a DA, or can I use a CDC?
Either can be possible. Under the Codes SEPP, complying development on a flood control lot needs certification from council or a hydraulic engineer that the relevant part of the lot isn’t a floodway, flood storage area, flow path, high hazard area or high risk area. The house must also meet extra standards for floor levels, flood-compatible materials and structure. If those standards can’t be met, the project goes through a DA, usually with a flood report from a hydraulic engineer.
How does flooding affect insurance, finance and building cost?
Premiums, excesses and whether flood cover is offered at all vary between insurers and policies, so get written quotes before you exchange, not after. Banks and valuers may also take flood risk into account. On the building side, the extra cost usually comes from the survey and reports, a raised or suspended floor, stronger structure, flood-compatible materials and site drainage. The guide shows where each item sits on a section drawing.
Six checks before you buy
Read the flood-related entries in the current Section 10.7 planning certificate.
Find council’s adopted flood mapping and information for the property.
Ask which flood levels, hazards and access constraints apply.
Get written insurance quotes and check cover, exclusions and excesses.
Allow for extra survey, design, engineering and construction costs.
Get site-specific advice if you plan to renovate, extend or rebuild.
What’s in the free guide

The 18-page PDF covers:
the four common types of flooding in NSW, compared by depth, speed, duration and warning time
how to read a flood map: which event, which datum, which version
a section drawing of the three lines that set floor height: the 1% AEP level, freeboard and the FPL
five design moves, and materials for the three zones around the flood line
landscape and services that keep the house running after a flood
where the extra money goes, four common myths, and a before-you-buy checklist with five questions to ask your designer
Frequently asked questions:
Is flood-affected land a bad buy?
Not automatically. Many flood-affected blocks can be built on with the right design. The real risk is buying without knowing the floor level, cost and insurance position.
My block has never flooded. Does that mean it won’t?
No. Past experience isn’t a forecast. Councils update their flood studies as rainfall data, catchments and modelling change.
Does ‘No’ on the 10.7 certificate mean the land is safe?
Not necessarily. Overland flow from heavy local rain isn’t always shown on older flood maps, and some areas haven’t been studied yet. If the land is low-lying or near a drainage line, ask council what information exists.
Who sets the flood planning level?
The local council, through its adopted flood study and its planning controls (LEP and DCP). The basis can differ between councils and between floodplains.
Who should I talk to first?
Council for the adopted flood information, a registered surveyor for levels in AHD, a hydraulic/civil engineer for flood behaviour, and an architect to bring it together into a design and approval strategy.
Sources
NSW Planning Circular PS 26-001: Flooding and land use planning (2026)
State Environmental Planning Policy (Exempt and Complying Development Codes) 2008
Environmental Planning and Assessment Regulation 2021, Schedule 2 (planning certificates)
The relevant council’s adopted flood study, flood maps and DCP
This article and the PDF are general information only. For a particular property, confirm current information with council and get advice from suitably qualified professionals.
About the author
William Yen-Wen Wang is the Nominated Architect of WWAA (William Wang Architect & Associates), a residential architecture practice in North Sydney (NSW Architect Registration 9897). He holds an MPhil in Environmental Design in Architecture from the University of Cambridge and a BArch (Hons 1) from UNSW, and is a PMP and LEED Green Associate.
Have a property in mind?
Start with the guide and the property’s planning certificate. If you’d like a site-specific view before you commit, email the listing to mail@wwaa.au to discuss a pre-purchase feasibility study. Our feasibility study guide explains what one covers.#SydneyArchitecture
WWAA designs new homes, knock-down rebuilds and renovations across Sydney, including on heritage conservation area, flood-affected and bushfire-prone land.
Understanding Before Design.
Architecture for Life and Time.
WWAA | William Wang Architect & Associates
Level 25, 100 Mount Street, North Sydney NSW 2060
Get the next guide in your inbox
Free, practical guides on buying, building and renovating in NSW: flooding, bushfire, heritage, feasibility and more. We'll email you when a new one is out. No spam, and you can unsubscribe at any time.



Comments