Buying a property in a heritage conservation area (HCA)? Can you still get the home design you want? (free guide)

By William Yen-Wen Wang, Nominated Architect (NSW 9897), WWAA, North Sydney
13 November 2026

Found a home you like, then noticed ‘heritage conservation area’ on its section 10.7 planning certificate?
Perhaps you’re picturing a bigger kitchen, another bedroom or a new home on the block. Before you put a price on those plans, find out which parts of the property contribute to the area and where there may be room to change.
Below, three of our approved projects show how that works in practice: one listed heritage item and two houses in HCAs.
Short answer: A heritage conservation area (HCA) protects the heritage significance of an area: its houses, their setting, gardens, rooflines and views. A house can contribute to an HCA without being individually listed. External alterations, additions and demolition commonly need development consent, so start with the local environmental plan and the controls that apply to the particular property. LEP clause 5.10
Key facts
HCAs and individually listed heritage items are set out in Schedule 5 of council’s local environmental plan (LEP). State-listed items are on the State Heritage Register.
Some councils class houses in an HCA as contributory, neutral or non-contributory. The terms and mapping vary between councils.
Eligibility for a complying development certificate (CDC) in an HCA depends on the code, the work and the land. Most substantial work goes through a development application (DA).
Where the Low and Mid-Rise Housing Policy applies in an HCA, you’ll generally still need a DA and a heritage assessment.
See Heritage NSW’s guidance and your council’s LEP and DCP.
WWAA Knowledge | Heritage Conservation Area is a free, illustrated 18-page guide for Sydney home buyers and owners. This page answers the main questions. The guide adds a map-reading key, a grading plan from one of our projects, three forms of rear addition and a checklist for before you buy or design.
Your free copy is ready (PDF, 2.8 MB, no sign-up):
If the button doesn’t open the file, use this link: WWAA Knowledge – Heritage Conservation Area (PDF).
Download not working? Your in-app browser may block downloads. Tap ••• at the top right, choose ‘Open in browser’, then tap Download again.
From our projects: three approved heritage designs
Three families, three old houses and the question this guide asks: what does the house contribute, and where is there room for the life they want?
Chatswood: a minimalist addition to a 1900 heritage item

Design render, Chatswood Heritage Extension.
Heritage status: listed heritage item (Item 172) · Council: Willoughby · Outcome: DA-2023/133 approved, January 2024
A minimalist addition sits behind the 1900 Federation house, with a courtyard and a lowered roof keeping new and old distinct. Because the house is a listed heritage item, the hardest part was winning council’s support for that contrast.
Killara: strengthening a Federation home’s classical symmetry

Design render, Killara Home Extension.
Heritage status: in an HCA, not individually listed · Council: Ku-ring-gai · Outcome: development application approved in 56 days, July 2025
We carried the house’s classical character through rather than copying it, extending the arched entry hall to strengthen its original symmetry. A central courtyard brings daylight into the middle of the house.
Artarmon: new life for a cramped inter-war bungalow

Design render, Artarmon House Extension.
Heritage status: contributory house in an HCA, not individually listed · Council: Willoughby · Outcome: development application approved, April 2026
A minimalist rear wing gives the old house the living space it lacked. Family life moves to the back of the house, where a courtyard and the garden become part of the home.
What does a heritage conservation area (HCA) mean for a buyer?
It means changes to the house are assessed for their effect on the significance of the area, not just the house. Check whether the property is in an HCA, individually listed or both. Read the current section 10.7 planning certificate with the heritage map and Schedule 5 of the LEP.
Then read council’s development control plan (DCP) and any statement of significance or heritage inventory for the area. These tell you what council values and what it will look for in a proposal. Ask, too, whether any draft heritage controls are proposed.
Can I demolish a house that isn’t individually listed?
Full demolition of a contributory house is generally hard to justify. Council weighs the significance of the area, what the building contributes and its local controls. Replacing a non-contributory house may be possible, subject to consent and an assessment of the new design.
Some councils, such as the City of Parramatta, map contributory buildings. Others, such as Ku-ring-gai, assess each building case by case, so a heritage consultant may need to assess the house and its setting. A nearby approval shows how council approached that site; read the reasons before drawing conclusions about yours. Ku-ring-gai DCP Part 19
Where can I add space?
The rear is often the place to start, behind and below the main ridge. For example, Ku-ring-gai’s DCP illustrates three common forms: a skillion or lean-to, a linked pavilion and an integrated wing. A low roof or recessed link helps the original house keep its prominence.
For an upper-level addition, check how much of it would be seen from the street and other public viewpoints. On some sloping sites, two levels can fit at the rear below the original ridge.
What you keep matters as much as where you build. Original windows, chimneys, side elevations and the garden can all contribute. Let new work look new, matched to the old house in scale and colour, and test the bulk, roof form and materials before committing to a layout.
Do I need a DA, or can I use a CDC?
For substantial additions, demolition or a new house in an HCA, a DA is the usual pathway, often with a heritage impact statement. CDC eligibility depends on the specific code, the work and the land. Some narrowly defined work, such as certain detached outbuildings and pools, may qualify if it meets every condition.
Minor work or maintenance may not need consent under LEP clause 5.10(3), but only if you notify council and it confirms in writing, before work starts, that the work is minor or maintenance and won’t adversely affect heritage significance. Separate exempt development rules may also apply.
For a State Heritage Register item, also check the Heritage Act requirements, including whether the work needs approval or fits a standard exemption. If you’re counting on a duplex or other low- or mid-rise housing, confirm how the state provisions apply to the lot before relying on that potential in your offer. Codes SEPP
What could this mean for cost and timing?
The unknowns usually sit in repairs to the existing house and in the junctions between old and new, so allow for investigation and specialist advice. Timing can also depend on the documents council asks for, public notification where required and design changes during assessment.
If the purchase depends on a substantial extension, ask a builder or quantity surveyor (QS) to price the likely scope, with an allowance for work that only shows up later. The bigger risk is paying a rebuild price for a contributory house on the assumption that it can be knocked down.
Who should I talk to first?
Start with the planning certificate, the heritage map and council’s guidance. An architect can test where the space you need might fit, and a heritage consultant can establish significance and advise on the likely impact. For a more involved proposal, ask council whether pre-DA advice is available and what to bring.
Six checks before you buy or design
Read a current section 10.7 planning certificate for the property.
Check the LEP heritage map and Schedule 5, the State Heritage Register and any draft controls.
Find the area’s statement of significance and council’s DCP controls.
Review nearby approvals and refusals where the reasons are available.
Test your plans with an architect, and get heritage advice if significance or impact is unclear.
If your budget depends on the work, get a realistic cost range for repairs and additions.
What’s in the free guide

The 18-page PDF covers:
four common myths about heritage conservation areas
what an HCA protects, and how to read a heritage map
how a house is classified, from State heritage item to non-contributory
the five grades, shown on a grading plan from one of our projects
five design principles and three common forms of rear addition
materials, the streetscape, approvals, cost and value
a ‘before you buy or design’ checklist and five questions to answer first.
Sources
Standard Instrument (Local Environmental Plans) Order 2006, clause 5.10 Heritage conservation
State Environmental Planning Policy (Exempt and Complying Development Codes) 2008
Heritage NSW, Guidelines for preparing a statement of heritage impact (2023)
Heritage NSW, Standard exemptions for works to State Heritage Register items
NSW Department of Planning, Housing and Infrastructure, Low and Mid-Rise Housing Policy FAQs
Ku-ring-gai Council, Heritage development controls and approvals; Ku-ring-gai DCP, Part 19
This article and the guide are general information only. Confirm current requirements with council and obtain suitably qualified advice for the particular property.
About the author
William Yen-Wen Wang is the Nominated Architect of WWAA (William Wang Architect & Associates), a residential architecture practice in North Sydney (NSW Architect Registration 9897). He holds an MPhil in Environmental Design in Architecture from the University of Cambridge and a BArch (Hons 1) from UNSW, and is a PMP and LEED Green Associate.
Have a property in mind?
See how we approached Chatswood, Killara and Artarmon above.
If you’re deciding whether to buy or how to extend, email the listing or address and a short note on your plans to mail@wwaa.au. We can discuss a site-specific feasibility study to test your options before you commit.
WWAA designs new homes, knock-down rebuilds and renovations across Sydney, including on heritage conservation area, flood-affected and bushfire-prone land.
Related guides: Buying a flood-affected property in Sydney · Buying a bushfire-prone property in Sydney · Feasibility study guide · All WWAA Knowledge guides
Understanding Before Design.
Architecture for Life and Time.
WWAA | William Wang Architect & Associates
Get the next guide in your inbox
Free, practical guides on buying, building and renovating in NSW: flooding, bushfire, heritage, feasibility and more. We'll email you when a new one is out. No spam, and you can unsubscribe at any time.



Thank you for putting together such a clear and practical breakdown of navigating HCAs in Sydney, William. The distinction between contributory and non-contributory items—and the realistic warning against paying rebuild prices without verifying demolition feasibility—is crucial advice that many buyers overlook. The Chatswood and Artarmon case studies also illustrate beautifully how contemporary rear additions can respect existing heritage fabric without copying it. Appreciate you sharing the 18-page guide!
Very helpful article. We’re looking at buying an older house in Killara that’s within an HCA but isn’t heritage listed. Is there a way to find out what we could realistically extend or change before making an offer?
Thanks for sharing this guide. We’re planning a fairly substantial renovation to our Federation home. How much extra time and cost should we realistically allow for the heritage assessment and DA process compared with a normal renovation?
I really like the contrast between old and new in your Chatswood project. Would a similar contemporary extension generally be acceptable in a heritage conservation area, or does it depend entirely on the council?
Does being in a heritage conservation area automatically rule out a knockdown rebuild? Our house has been extensively altered over the years, so I’m wondering whether that makes any difference.